The speed sensor is a paddle wheel mounted at the transom that uses the flow of water under the boat to measure speed. It is possible to pair the speed sensor with a flow sensor to the fuel monitor fuel economy of the boat.
The device is simple and intuitive with important functions easily accessible and with a sonar for the automatic adjustment.
With the black connector 9-pin cable length 10 mt.
Pre-set the temperature of the water, but can also be configured to monitor the temperatures for hot live, container for bait, external and internal, engine compartment, cab, cooling system and heating system with a display Lowrance compatible.
The ceramic element is tilted to compensate for deadrise built-in, offering an excellent return of the echo for depth readings more accurate.
Ppilot automatic for the display of the high definition system (HDS) Lowrance, which allows a government automatic for the outboard engines to the government cables. The pilot outboard, equipped with the control SmartSteerTM of Lowrance from your Gen2 or Gen3 HDS, will guide you in a direction, a waypoint or a route.
Transducer installation on the transom P66 Plastic 50/200kHz. With Connector XSONIC 9-pin.
Cable length mt.10
Allows you to monitor the fill level of the tank sharing the data on the level of the fluid with a compatible display connected to the network the NMEA 2000®. Can be configured to monitor the fill levels of the tanks for fuel, oil, tub of live, fresh water, grey water and black water with a display Lowrance compatible.
With resolution of the target without precedent, even at a range of 1/32 nm. Piers, beacons channels, moored boats and other critical points are displayed with incredible clarity. The technology, Broadband Radar™ eliminates the "main bang" of pulse radar.
Ensures a clear view of fish, structure and profile of the bottom in an incredible three-dimensional perspective. The 3D imaging StructureScan® analyze the soil underwater, and the structure for the containment of the fish in order to create a high-resolution display, 180-degree, three-dimensional of the seabed below the boat.
The transducer is equipped with a cable by 33 feet, and a blue connector 7-pin Lowrance that connects directly to the Gen 2 Touch and Elite-7 HDI.The transducer must be selected in the installation menu of the device.