The system combines a pure sine wave inverter with a sophisticated battery charger featuring adaptive charging technology. It's also compatible with lithium batteries. Two AC outputs are available. In the event of a power outage from the shore or generator, the device automatically switches to inverter mode to power whatever is connected, seamlessly.
Purchased together
Alternative products
The system combines a pure sine wave inverter with a sophisticated battery charger featuring adaptive charging technology. It is also compatible with lithium batteries. Two AC outputs. In the event of a power outage from the shore or generator, the device automatically switches to inverter mode to power whatever is connected, seamlessly. The second output is only available when an AC source is present. Devices that could drain the battery, such as a boiler, should be connected to this output. Parallel + three-phase function. Up to 6 devices can be connected in parallel. Three units of the same type can be connected for three-phase current. Up to 6 sets of 3 units can be connected in parallel. Power control: the MultiPlus is very powerful and can absorb significant power from the shore or generator. With the MultiControl panel (14.270.32), you can monitor the power consumption by setting a maximum limit. The MultiPlus, taking into account the set limit, will only use the remaining energy to charge the batteries. Power assist: When a short-term power surge is required, the MultiPlus will compensate for the insufficient power by drawing energy from the battery. When the load decreases, the excess power is used to recharge the batteries. The microprocessor-controlled charger has a 4-stage bulk-absorption-floot-storage charging system similar to the Phoenix/Skylla charger. - Aluminum housing - Protection against short circuit, overload, low or high battery voltage, high ripple frequency, etc.
Popular products in recent days
Don't miss our bestsellers
