- -17.54%
Durable stainless steel bolted version. Yields up to 46 l/m at 1.5m and 36 l/m at 6m height. With oil-resistant nitrile impeller and stainless steel wear plate. Self-priming up to 1.2m. Stainless steel grinder for grinding solids up to a maximum of 3mm (1/8") particle size. Inlet 38mm (1-1/2") barbed and 1 1/2" NPT (barbed nipple), outlet 25mm (1") barbed. Dimensions: Height 21.6cm / Width approx. 21.0cm / Length 30.9cm
Purchased together
Rating:
(0)
Correlated accessories
Alternative products
Product Details
- Original Ref.
- 22130-2721
Description
Jabsco 22130 Series Pump Exploded View
Each number in the image corresponds to a spare part. You can find the original part number in the table below. The codes highlighted in orange are clickable and allow you to purchase the part directly. For any questions or support, contact [email protected]

| Ref. | Description | Original code |
|---|---|---|
| 1 | Hat nut | 91085-0340 |
| 2 | Fiber washer | 91613-0140 |
| 3 | Bolt | 17288-0010 |
| 4 | Macerator body | 18594-1000 |
| 5 | Needle cutter plate with locking nut | 37056-2000 |
| 6 | Macerator plate | 18597-1000 |
| 7 | Gaskets (2 pieces per kit) | 18596-0000 |
| 8 | Impeller | 7273-0003 |
| 9 | Wear plate, small | 12316-1002 |
| 10 | Pump body | 18593-1000 |
| 11 | Sealing ring | 1040-0000 |
| 12 | Set of sealing rings | 6342-0000 |
| 13 | Bolt | 17288-0000 |
| 14 | Motor | 22138 |
Popular products in recent days
Don't miss our bestsellers
