Tender and engine

Impeller for Jabsco pump 13554-6001

DA0486

(1)

kr307.56 kr445.36

Compatible impeller for Jabsco pumps 13554-6001.

Impeller Mercury 4t 9.9-15 hp Ref.or.47-42038

-2.33%

Motor impeller

Impeller Mercury 4t 9.9-15 hp Ref. or.47-42038

DA0852

kr233.22 kr238.80

For motors: 4T 9.9-15 HP, dim. Ø int.mm. 13 Ø ext.mm.58,8 thickness mm.11.7, nr.6 blades

-10.34%

Water pump impeller

Impeller for pump Jabsco 17370-0001

DA0480

kr585.44 kr652.97

Compatible impeller for pumps Jabsco 17370-0001.

-4.41%

Water pump impeller

Jabsco Pump Impeller 18948-0001

DA0468

kr436.57 kr456.69

Compatible impeller made in Italy, 18948-0001. Equipped with: 6 gaskets 1 o-ring

-3.9%

Water pump impeller

Jabsco Pump Impeller 13554-0001

DA0466

kr287.71 kr299.38

Compatible impeller made in Italy for Jabsco 13554-0001 pumps.

-16.3%

Water pump impeller

Impeller for Jabsco USA pump 17018-0001B

DA0455

kr922.87 kr1,102.58

Original Jabsco USA impeller, 17018-0001B.

Water pump impeller

Impeller for Jabsco USA pump 17936-001/21676-0001-21676-0003

DA0452

kr1,525.47

Original Jabsco USA impeller, 17936-001/21676-0001-21676-0003. Equipped with 1 gasket.

Impeller for Caterpillar pump 1095327/1230492/1095324/1239785

-20.1%

Water pump impeller

Impeller for Caterpillar pump 1095327/1230492/1095324/1239785

DA0431

kr1,657.27 kr2,074.07

Compatible impeller for Caterpillar pump 1095327 - 1230492 - 1095324 - 1239785. Equipped with: 1 set screw 2 o-rings

-19.56%

Propeller shock absorber

Couplings for Suzuki 150/225 engines

DA0606

kr759.21 kr943.86

Mounting kits for engines: 150 - 175 - 200 - 225 (2T - 4T).

Sprocket carrier for Suzuki 60/140 engines

-19.56%

Propeller shock absorber

Couplings for Suzuki 60/140 engines

DA0605

kr759.21 kr943.86

Mounting kit for engines: 75 - 90 - 100 - 115 - 140 (2T) 60 - 70 old (4t)

Splitters for Yamaha - Selva 4T 150/250 engines

-19.56%

Propeller shock absorber

Cotter for engines Yamaha - Selva 4T 150/250

DA0604

kr759.21 kr943.86

Mounting kit for engines: 115 (4T) # 150 - 175 - 200 - 225 - 250 (2T - 4T) 300 2T, 300 V6 (4T) Stern Drive 3.0L~7.4L #

Euro series water lubrificated bushing in resin and rubber

Euro series water lubrificated bushing in resin and rubber 2

-23.72%

Propeller shaft bushing

Tor Marine

Euro series water-lubricated resin and rubber bushing

kr355.84 kr466.50

Made of resin and rubber.

Spare parts for steering systems

Lewmar

Mirror polished stainless steel wheel lock knob - Lewmar

(1)

kr1,806.14

It can be installed on any wheelhouse Lewmar and allows the rudder to be locked.

Nylon and brass scales with collar - Inside diameter Ø (mm) 35

Accessories for inflatable boats

Nylon and brass collar scaling - Inner diameter Ø (mm.) 35

kr167.72

Nylon and brass collar scaling - Inner diameter Ø (mm.) 35

Spare cartridge R20P for RACOR filter - 30 Micron

-28.12%

Diesel water separator filter

Racor

R20P Replacement Cartridge for RACOR Filter - 30 Microns

DA0617

kr714.46 kr993.93

R20P cartridge, flow rate 114 Lt/h, 30 micron

-6.45%

Rudder accessories

Rudder extension joint

DA0835

kr173.68 kr185.65

Joint for flat drawbar extension from mm.10 to 14, base hole spacing mm. 38, fixing holes Ø mm. 4.

Fin for 25/50hp 2t 25/30hp 4t engines (or. ref. 3B7-60217-0)

Fin for 25/50hp 2t 25/30hp 4t engines (or. ref. 3B7-60217-0) 2

-17.02%

Sacrificial anode

Fin for 25/50hp 2t 25/30hp 4 engines (or. ref. 3B7-60217-0)

DA0934

kr469.42 kr565.70

Zinc fin for 25-50HP 2T, 25-30HP 4T engines (or. ref. 3B7-60217-0)

-31.93%

Engine control lever for boats

Single-lever version control boxes for a dual-action engine for throttle and reverser control. Suitable for any type of boat with outboard, inboard and stern drive engines equipped with hydraulic reverser. They make driving easier and safer by automatically preventing the reverser from engaging if the throttle is not at idle.

B65 control box - Ultraflex

DA2384

kr4,247.63 kr6,240.40

View

Steel 4 blade propeller 14 1/4 x 17 for Johnson engines

-31.64%

Propeller shock absorber

Steel 4 blade propeller 14 1/4 x 17 for Johnson engines

DA2225

kr6,208.69 kr9,081.89

Steel 4-blade propeller 14 1/4 x 17 for Johnson engines

-31.95%

Engine control lever for boats

Single-action bilever control box suitable for any type of engine equipped with hydraulic reverser. Supplied with snaps for reverser and knob for externally adjustable clutch, uses C2 - C8 - Mach Zero cables. For C22 cable K32 kit art. 4242064.

Bileva control box B101 - Ultraflex

DA2383

kr5,304.58 kr7,794.60

View

B322S Dual Lever Control Box - Ultraflex

B322S Dual Lever Control Box - Ultraflex 2

-31.95%

Engine control lever for boats

Dual-lever control boxes made of die-cast and chromed aluminum for one engine, suitable for any type of boat with outboard, inboard, or sterndrive engines. Uses C2 - C8 - C14 - Mach Zero - MACH14 cables. With K60 kit: C5-C16-Mach5. With K62 kit: C36-Mach36. With K61 kit: C22

B322S Dual Lever Control Box - Ultraflex

DA2382

kr7,358.92 kr10,814.42

-31.95%

Engine control lever for boats

Bileva control boxes constructed of die-cast and chrome-plated aluminum for an engine suitable for any type of boat with outboard, inboard and stern drive engines. Uses C2 - C8 - C14 - Mach Zero - MACH14 cables. With K60 kit: C5-C16-Mach5. With K62 kit: C36-Mach36. With K61 kit: C22

Bileva control box B322 - Ultraflex

DA2380

kr7,144.56 kr10,499.09

-31.93%

Engine control lever for boats

Single-action bilever control box, each lever separately controls the gas or reverser cable.The recessed application makes it particularly suitable for installation on flying bridges where exposure to sea spray is greater. The structure of the leverIs made of die-cast painted alloy, the handleIs ergonomically made of soft material.

Bileva control box B204 - Ultraflex

DA2377

kr3,684.92 kr5,413.70

-33.95%

Engine control lever for boats