Prodotti alternativi
Description
It consists of stainless steel bearings to ensure perfect operation even when the strulle is under maximum tension. Its height of only 50 mm allows the jib to be installed very low, just above the deck for maximum sail efficiency. It can also be mounted below deck using an additional stainless steel extension tube. The jib furler can furl up to 3.5 mm of 3 mm diameter line, thus allowing the use of sails with a lower edge length (between the tack point and the sheet point) of about 3 m. This length is reduced for ropes with larger diameters.
Popular products in recent days
Don't miss our bestsellers