The beating heart of our boat is the engine and finding its accessories and spare parts has never been so easy.
Inboard or outboard, it doesn’t matter. We will be able to sail thanks to the wide range of accessories you can find in “boat control and guide”.
The hydraulic steerings will make enjoyable our navigation, paying attention to the fantastic designs of the steering wheels availables.
CE ISO 21487 certified endowed with inspection hatch, cap with vent, dip tube Ø mm.10 and vent Ø mm.16. Prepared for mounting a second suction or return and sensor level.
Made of two layers of polyester resin self-extinguishing, class 1, with a polymeric EPDM sheet of 2 mm., weight 4 Kg/m2. It absorbs medium and low frequencies. The exposed surface coated with a film of dithered aluminium extremely impact resistant. Ideal for the insulation of engine compartments. Sold in sheets of mm. 1000x750.
Engines: Mercury - Mariner - Johnson - Suzuki - Honda - OMC - Yamaha - Tohatsu
Made of polymer polypropylene, black. Apply to the plate anticavitation valves with the 4 bolts and nuts (included). For engines from 8 to 40 HP.
The handle and the stainless steel spokes-coated in soft polyurethane.
Made of polymer polypropylene, black. Apply to the plate anticavitation valves with the 4 bolts and nuts (included). For motors over 40 HP.
Made of polymer polypropylene, black. Mounting without drilling the plate anticavitazionale. For motors over 40 HP.
Original impeller Jabsco USA, 6303 - 0003.
Fork plastic-coated steel with suction cups, round, rubber.
Fork plastic-coated steel with suction cups, round, rubber, model with influx of water from a side.
Achieved through the coupling of two layers of polyester resin self-extinguishing, with a sheet of polymeric EPDM 2 mm., weight 4 Kg/m2. Absorbs medium and low frequencies. The exposed surface coated with glass fibre to prevent the transmission of heat and noise. Ideal for the insulation of engine compartments. Sold in sheets of mm.1000 x 2000
Self-priming pump with bronze mouths, Ø mm. 28. For engines Aifo, Solé M636, SM636, VM 804M, 806M, Volvo MD22, Perkins, Ford, Mercedes.The capacities are calculated with the engine at 700/2000 rpm.
Tank built in eltex, certified ISO 13591 and conforming to the decreethe ministry of education. Full of reserve.Fill to 90% and cap with vent safety screw.This model is provided with the system autopescante with filter and level indicator.
This cable can adapt to all inboard engines and stern gear installations by means of the accessories of the series "L" and on outboard Chrysler, Yamaha, Suzuki, Mariner, Force, Selva, Tohatsu, Honda, Nissan by means of "K"series.
Body in brass.
To install SE Sport 200/300 without drilling the plate anti-cavitation. You install on all outboard motors and sterndrives except the following models: all Volvo, Mercury 50HP 2 STROKE, Mercury 40-50-60 HP 4-STROKE, Mercury Bravo III and II (it's also good on the Bravo III with two anodes below the plate of cavitation), Honda 200/225.
The pre-filter Mercury water separator - gasoline. Flow rate 150 litre/h. Support light alloy die-cast, painted black. Complete with:10 micron cartridge; clear bowl with drain; 2-hose connection Ø mm. 10; 2 caps.
Control boxes single lever to dual action for the control of the throttle and shift from the modern and essential design, free of protrusions, which makes them particularly suitable for use on sailing boats.