The vest allows you to automatically...
The speed sensor allows you to easily gather data on the speed and sends it to your fishfinder echo™.
Transom mount transducer with cable of 6 mt, technology, Chirp and temperature integrated.The green connector.
Trasuttore stern 50/200 455/800 kHz blue connector 7-PIN.Transducer hybrid Dual Imaging ™ HDI 50/200/455/800. The power of two technologies award-winning - Broadband Sounder PLUS exclusive DownScan Imaging ™ - combined to provide the best possible visibility under your boat.Complete with temperature sensor.Includes mounting bracket and hardware.
Cable length mt.10
Cable length mt. 10
Cable length mt.10
The transducer is equipped with a cable by 33 feet, and a blue connector 7-pin Lowrance that connects directly to the Gen 2 Touch and Elite-7 HDI.The transducer must be selected in the installation menu of the device.
Transducer to the transom with the frequency Low and High CHIRP + 455/800kHz DownScan HDI.Cable 6 mt. with connector xSonic.
Compatible with the functions Bottom Discrimination Sounder, Accu-Fish and Rezboost Enhanced. Equipped with sensor of temperature and speed. Features:Frequency 50/200 khz Power 600 Watts Connector 10-pin
High-performance transducer 1kW for installation in the stern. Provides data on the depth and on the temperature and is designed for bottom fishing. It features an operating frequency of 200 and 50 kHz and a width of beam of 19 degrees at 200 kHz and 6 degrees at 50 kHz. Includes installation instructions.
Transducer HDI Skimmer 83-200-455-800 kHz, with temperature sensor and mounting Kit included. Long cable 6 mt.
The transducer aft of the Bullet Skimmer-frequency 200 khz echosounder Series HOOK2.
Transducer installation on the transom P66 Plastic 50/200kHz. With Connector XSONIC 9-pin.
Flow sensor fuel only petrol, up to 3 supported engines. Outputs:Fuel flow Fuel tank used Fuel travel used Fuel seasonal used
The speed sensor is a paddle wheel mounted at the transom that uses the flow of water under the boat to measure speed. It is possible to pair the speed sensor with a flow sensor to the fuel monitor fuel economy of the boat.
Pre-set the temperature of the water, but can also be configured to monitor the temperatures for hot live, container for bait, external and internal, engine compartment, cab, cooling system and heating system with a display Lowrance compatible.
Pre-configured to share the data of the temperature of the water with all compatible displays connected to the network the NMEA 2000®. The sensor can also monitor the temperatures for the engine compartment, cabin, tub of live, container for bait, a system of refrigeration and heating, internal and external, if configured with a display Lowrance compatible.
The sensor management of the fuel data stores the data of the use of fuel, location, and seasonal, coming from an interface engine or a engine compatible connected to the network the NMEA 2000®.
The pressure sensor is preconfigured to pressure of the water in the engine, but can also be configured to monitor boost pressure engine oil pressure engine oil pressure, transmission speed and the Pitot with a display Lowrance compatible.