Anti-fouling self smoothing for...
Millions of people have already installed Gas level. The quality of the Made in Italy combined with a good price, make this product indispensable in the field of safety of LPG installations.
In heat-moulded material and tank in AISI 316 stainless steel, with heat exchanger. Small size, easy to install. Piping the output to 1/2". 1 Bar = 100 kPa
Marine manual TOILET in white porcelain, with pump nylon piston. By turning the knob 90° and actuates the lock/unlock, which avoids the overflow and the reflux purge. Seat in wood enameled white. Tube entry Ø mm.20, outlet hose Ø mm.38. Can be installed above or below the waterline.
Sink oval stainless steel with cover in tempered glass and the faucet folding retractable
With pressure control lever, it can be blocked in order to generate a constant water flow, as a tap. Endowed with white tube.
Complete hatch with inspection side cap with vent.Diameter, hose connector Ø mm.16/19 with thread Ø 3/8 Diameter, hose connector Ø mm.10/12 with thread Ø 3/8.
In composite material and tank in Aisi 316 stainless steel, with heat exchanger. Saddles and bands in stainless steel Aisi 316 for mounting to the wall or floor are included. Piping the output to 1/2". 1 Bar = 100 kPa
Complete with motor with base, hose connectors useful to don't replace fittings and pipes, electrical panel, cm.40 Ø mm.25, bolts and screws. It fits with the following WCs: Jabsco, TMC, AAA, Raritan, Groco, Wilcox, etc.
Made in ABS UV resistant. Complete with mixer hot and cold water, shower, flexible hose. The assembly is level and vertical.
Complete hatch ispezionatile central, cap with ventHose connector Ø mm.16/19 with thread Ø 3/8 Hose connector Ø mm.10/12 with thread Ø 3/8.
Boiler in stainless Steel AISI 304, stainless Steel tank in AISI 316 with plate heat exchanger. Saddles and bands in stainless steel Aisi 316 included for installation on the wall or on the floor. Piping the output to 1/2". 1 Bar = 100 kPa.
Pipe length mt. 2,50 Tubes to male fitting on both sides.
With the hatch full inspection of the lling openings, dip tube and hose.
1/2", mix hot and cold water to the ima selected temperature. Allows a savings in hot water.
The solenoid valve for the water loading in the case of installation of more TOILETS.Also works as a siphon break if the WC are located below the waterline. Female thread by 1/2.