The boat is our floating house, so all the components for a correct network of hydraulics, pumps and bathroom fixture cannot miss.
This is the category that satisfy daily needs: WC, facets, mixers and showers for personal hygiene perfectly efficients thanks to the best pumps and autoclaves available on market.
HiNelson staff can help you to study your spaces, advising you tubes and connections suitable for your boat.
Pump autoclave for shower, can serve 2 taps automatically.
Flexible tank for water with double envelope, composed by PVC. They are flexible, light and form-fitting.
Complete with motor with base, hose connectors useful to don't replace fittings and pipes, electrical panel, cm.40 Ø mm.25, bolts and screws. It fits with the following WCs: Jabsco, TMC, AAA, Raritan, Groco, Wilcox, etc.
With pressure control lever, it can be blocked in order to generate a constant water flow, as a tap. Endowed with white tube.
The best and efficient tool for transferring any type of liquid: diesel fuel, oil, gasoline, water, detergents, etc., The system is provided with a pump and a tube that allows you to completely empty the containers without any effort and without sucking to extract the liquid.
It is a toilet paper widely used in the nautical and camper field because it dissolves itself in water without clogging up the WC drain. For portable and fixed toilettes. Two ply.
This pump has a bypass that ensures a uniform and silent flow, eliminating the storage tanks. The rubber also minimize noise and vibration. Self-priming up to 3 mt., it can works dry without damage. Compliance with ISO 8846 MARINE (ignition protection). With pressure switch.
Bilge pump Europump II immersion certified CE by R. I. N. a. according to law 94/25, according to the directive ISO 8846.
Complete hatch with inspection side cap with vent.Diameter, hose connector Ø mm.16/19 with thread Ø 3/8 Diameter, hose connector Ø mm.10/12 with thread Ø 3/8.
In composite material and tank in Aisi 316 stainless steel, with heat exchanger. Saddles and bands in stainless steel Aisi 316 for mounting to the wall or floor are included. Piping the output to 1/2". 1 Bar = 100 kPa
Made in ABS UV resistant. Complete with mixer hot and cold water, shower, flexible hose. The assembly is level and vertical.
Manufactured of durable nylon, the handle is made of stainless steel.
Flexible reservoir for water made of material thermoplastic elastomer, with the hatch welded, full raccorderai, hose fitting boarding Ø mm.35/50/60 and output Ø mm.12.
Composed by pump body, impeller, gaskets and o-rings.
Quick coupling male for entry into fresh water. Allows you to connect the on-board system to the water supply of the port, avoiding the consumption of the reserve board. Complete of container in ABS white, and its white cap, reducer, pressure 2.5 bar, curve, elbow, male thread 3/4” non-return valve.
Fully threaded with non-return valve, nut and screw cap.
Can easily enter into canisters and tanks.
Designed to ensure high performance, easy to install, compact, and easily serviceable.
Filter, aluminum, nylon and carbon to vent tanks black water. Hose connector Ø mm. 17 and 19
Automatic switch eco-friendly bilge pumps.
Equipped with gears in PTFE, suitable for spraying, water transfer, chemical liquids and food.
Foot pump double acting for sinks and showers, body nylon, membrane and neoprene.