Adhesive glue Adegrip for PVC fabrics. For the use of the glue, you need the activator (included).
The activator for the glue Adegrip and Adeprene.
Support adhesive for ribs gray rubber and stainless steel fork. Dim. mm. 205x10h
Valve replacement Halkey Roberts dinghy Plastimo.
Kit in blister pack for inflatables in neoprene/hypalon.
The kit includes : 1 tin of 400 gr. of Adeprene Strong 1 bottle of 50 ml. activator 1 brush 1 a piston-operated pipette 1 graduated measuring cylinder 100 ml 1 spatula 1 piece of sandpaper 2 patches, round, 3 pieces rectangular 1 pair of gloves
The kit includes :1 tin of 400 gr. of Adegrip PVC 1 bottle of 50 ml. activator 1 brush 1 pipette 1-beaker, 100 ml graduated 1 spatula 1 can 250 ml. of Cleaner 264 2 patches, round, 3 pieces rectangular 1 pair of gloves
Equipped with a rib on the cage that allows the body to remain completely encased in the tubular. The lanyard that holds the cap is located beneath the cap itself, therefore, invisible. By pushing on the central button of red color, the valve opens, pushing the second time the valve closes.
Allows you to make an emergency repair without the use of tools or the hill, both above and below the waterline, it can be reused. Instructions:Enlarge the opening up to 5 cm. Fit the lower part of the Clamseal Overtightening of the two parts around the tear
Inside there is an insert of hard on which is inserted a screw that goes through the braid and the block.
Lever is required for mounting and removing valves.
The large base prevents the rubbing of the top on the tube.
The Bow Step is manufactured in rigid PVC and can be installed on a tubular by Ø cm.35-Ø cm.65. Thanks to its hard inner allows for the installation of lights, cleats, handles, musoni, hinges, ladders, and many other accessories.