Very sturdy and suitable for all type of seabeds, with articulated arm with strong angle.
Still with time and marre rather dumpy but very massive. Its compactness and the flukes furniture also make it easy to stivabile. Cast in special cast iron, high-strength, hot-dip galvanizing.Weights are subject to slight variations.
Manufactured in stainless steel HR specific. Provided with no squeak caps in order to improve quiteness. Provided with full load yeld strength and the special heads allow a perfect axiality during the conversion.
The Danforth is an anchor to the flat with a diamond articulated that allows the movement of the flukes. Is excellent on sand and mud, which is much less efficient on vegetation and rocks. Weights are subject to slight variations.
The shock absorbers mooring Master Mooring have an operation to elastomers and are made in 3 different models. Thanks to its components of high technology, are able to absorb loads at very high levels.
Still four flukes foldable, perfect for small boats and rafts, not only for space, but also for their reduced requirements of the anchor. In fact, it has great sealing ability, with the exception of the rocks, where he manages to slip in the crevices. Manufactured entirely in steel, hot galvanized. With a counterweight to prevent the terminal...
Floating anchor professional model.
The special construction of the concave surface allows the still Swords immediately find the location for an anchor safe and durable. The very low centre of gravity avoids any skidding of the still even in conditions of stress. The weight is arranged in the tip: the tip is heavy and sharp it penetrates immediately to the seabed most hard with extreme ease.
Still flat and without any cash to the joint, is there any risk of locking of the spindle due to clogging for mud or rocks, it also provides a snapshot taking.
Similar to the models of CQR, it offers excellent performance on all types of seabed.
Allows for rapid penetration with any type of bottom, suitable for all boats and mega yachts. Thanks to the roll-bar and to the weight distribution of the still finds immediately the optimal angle of penetration, while the large concave surface ensures a secure grip with any condition of sea and wind.
Closing with galletti, overall length 155 mm.
The chain genovese is indicated for solutions of the mooring. It is important to rely on products of the highest quality. Technological processes and accurate of zinc allow a good resistance against corrosive agents, and the durability of the chain.The advantage of galvanised steel is also less expensive stainless steel. Clubs from mt.25
Characterized by an exceptional seal with any type bottom (seaweed included) and by the speed at riagguantare the outlet when the boat is rotating tends to spedare the still. It also has a remarkable ability to increase the socket to the increase of the wind.
Chain Gripper is a shackle for anchor in stainless steel, with pin one not to miss.Very useful because it allows you to connect the second anchor to the main chain in a simple way, without reducing the workload.
Built with forged, which increases the resistance under load, and ensures an excellent grip even in difficult conditions thanks to its design.
Spring mooring design that combines the simplicity of concept and ease of installation.