It's very important to protect your engine calender against storm or weathering. This is the reason why we have 7 different sizes which are right for you.
To protect your engine from storms and weathering is very important, that's why we have 3 types of sizes which are right for you.
To protect your control panel from storms and weathering is very important, that's why we have 5 types of sizes which are right for you.
With stretched extreme for a better grip.
For pipe handrail Ø mm. 22 suitable for insertion of slats to support the fabric of the boat.
Coverage for the protection of the foot of the outboard motor or stern group from marine vegetation and galvanic currents.
Complete with cap in white PVC, fixing on a flat base. Suitable for insertion of slats to support the fabric of the boat.
With a canopy and a support for the tarpaulin of the boat. Strong, durable and flexible.
Sold in roll, its special feature is the two elastic applied laterally along the entire length, acts to facilitate and reduce the time of commissioning.
Compatible with any model of pleasure boat and inflatable boat.
The tool used to tighten the strap and secure your cover.
Knife two blades are recessed for greater safety, designed for the cutting of the fabric to shrink and tape.
Sold in roll, towel very thin the product with the polyethylene of the first highly transparent, elastic and soft for internal use. Ideal for protecting boats in storage and everything that need to be protected from dust and dirt.
Suitable for tension fabric interior and to avoid the stagnation of water.
With the insertion of mm. 50 x 100, you can protect the fabric when you insert a support pole, in order to avoid the stagnation of water. The 4 openings allow the passage of the strap for fastening on the boat. It can also be used as a base for the support pole.
Allows you to connect to and then disconnect from the gun and fitting angle of 75° for the compaction of the fabric in the parts most distant and difficult to reach.
In polyethylene, black UV resistant. Thanks to its shape and allows the passage of air but not of water. Can be mounted both in horizontal and in vertical.
With slot self-drilling.
Allows access to the covered structure during storage. Attaches via adhesive tapeheat shrink after shrinking of the fabric.
Cloth heat-shrink white in color produced in polyethylene and with a a color additive in white stabilized to ultraviolet (UV) radiation. It has the advantage of reflecting the rays of the sun and thus promotes a better preservation and maintenance of low temperatures.
Ideal for repairing holes, cover folds connect the vents and doors after the compaction the fabric. The tape does not need much heat to melt , when it is applied should be cut and not torn, and when it's cold or wet should be slightly warmed.
Used to fix the studs support of the pole, and as the perimeter strip, in the boat, to stop the fabric from being lifted by the wind.
Used to block and keep the tension in the strap.